Thermowells are essentially a circular cylinder installed like a cantilever into the process piping. They provide process condition protection and a process seal for temperature sensors. As a process fluid passes around the thermowell, low pressure vortices are created on the downstream side in laminar, turbulent, and transitional flow. The combination of stresses, generated by the static in-line drag forces from fluid flow and the dynamic transverse lift forces caused by the alternating vortex shedding, create the potential for fatigue-induced mechanical failures of the thermowell. Piping designers may use a variety of tools to predict and avoid thermowell failures in their systems, but ASME PTC 19.3-1974 had been the standard by which most thermowells were designed.

pdf icon Rosemount-2012-Thermowell-Calculations.pdf

Rosemount (2012) Thermowell Calculations
%d bloggers like this: